1. Make sure the ON/OFF switches are in the OFF position before inserting the batteries. 2. Put 4 AA batteries into the bottom of the machine. 3. Push Switch to On or Off. The “On” position of the switch is flush with the device. The “Off” switch position is extended. The sewing machine will start immediately. Ensure that the machine is properly threaded and the fabric is positioned for suture before turning on the machine.
Two power options: you can use the battery or you can use the 110/220V power supply, but the two power supplies cannot be used at the same time.
Specifications Type: Mini Sewing Machine. Formation stitch: chain stitch. Feeding mechanism: walking foot. sewing thickness: 5mm. Stitch length: 2 mm. Mechanical configuration: flat bed. Size: approx. 17.5*9*19cm. Accessory: 1 x Foot Pedal, 1 x Adapter, 1x Thread Bag
Changing Needle 1. Turn the hand wheel (K) clockwise to raise the needle (R) to its highest position. 2. Loosen the needle clamp screw (O) by turning it counterclockwise (towards you). You may need to use a short slotted screwdriver or small pliers. 3. Remove the needle (R), and pull away from the needle clip (P). 4. Place the new needle with the flat side facing in against the needle clip (P). 5. Gently push it in as far as it will go, and against the needle clip (P). 6. Tighten the needle clamp screw (O) while holding the needle (R) in place.
To use the foot pedal 1. Bring the machine to a certain off position. 2. Connect the foot pedal socket (M) to the back of the machine. 3. Turn on the machine by pressing the foot pedal. 4. Gently press the foot pedal to turn on the machine. Let's stop. When you have finished stitching the seam, ease your foot up and off from the foot pedal.
Safety Information 1. Always disconnect or remove the power supply including batteries when changing needles or threading machines 2. Never open the main engine of the machine. The factory theme has been modified. 3. Always check lockstitch threads before starting to sew a seam. Improper threading or bobbin placement in this situation will damage the machine. 4. Do not pull on the fabric while you are sewing. Gently guide only. Pulling can break the needle and damage the device. 5. Remove the batteries when the device is not in use for extended periods. This saves battery life and protects the device. Keep extra batteries on hand so projects aren't interrupted when the batteries need to be replaced. 6-Keep away from your children: This sewing machine is not a toy and is not intended to be used by or near children.
Package Included
1 x Multifunctional Sewing Machine, 1 x Foot Pedal, 1 x Adapter, 1x Thread Bag (Batteries are not included in the package.) or 1 x Machine Kit (The sewing of this kit is 220V for EU plug)
Dear friend, Any questions please contact us, we are absolutely responsible for all of our items all the time
